As a key player in the Southern Transdanubia Region, we ensure professional and reliable cleaning of grease and oil traps - choose us for expert solutions!
Relevant legal obligations
Decree 28/2004. (XII. 25.) of the Ministry of Environment and Water defines the limits for the oil and fat content of wastewater that can be discharged into public sewers, which can only be met with properly maintained separation equipment. The equipment must be cleaned and emptied by a specialist contractor at a prescribed frequency, and the cleaning operations must be documented. The waste generated in oil and grease traps must be considered hazardous waste, and its removal and disposal must be ensured in accordance with the applicable environmental protection regulations. The authorities regularly check the existence and condition of the equipment, and in the event of a shortage or improper operation, they can impose heavy fines.
The most important laws can be viewed here: GENERAL PROVISIONS 219/2004. (VII. 21.) Government Decree on the Protection of Groundwater 220/2004. (VII. 21.) Government Decree on the Rules for the Protection of Surface Water Quality 28/2004. (XII. 25.) KvVM Decree on Limit Values for Emissions of Water Pollutants and Certain Rules for Their Application Act LIII of 1995 on General Rules for Environmental Protection Act LIII of 1996 on Nature Protection Act XXV of 2000 on Chemical Safety Act XLVI of 2008 on the Food Chain and Official Supervision WASTE MANAGEMENT 72/2013 . (VIII.27.) Decree of the Ministry of Environment on the list of wastes (IDENTIFICATION codes) 78/2007. (IV. 24.) Government Decree on the environmental basic register 225/2015. (VIII. 7.) Government Decree on the detailed rules for certain activities related to hazardous waste 309/2014. (XII. 11.) Government Decree on the registration and data provision obligations related to waste Act CLXXXV of 2012 on waste WATER PROTECTION 27/2005. (XII. 6.) Decree of the Ministry of Environment on the detailed rules for the control of the discharge of used and waste water 28/2004. (XII. 25.) Decree of the Ministry of Environment and Water on the limit values for the emissions of water pollutants and certain rules for their application The above list of laws does not cover the special activities of our clients, everyone should inform themselves about this and inform our colleagues in case of cooperation!
Cleaning grease traps
Cleaning grease traps is essential for proper operation and compliance with environmental regulations. These devices are mainly found in restaurants, catering establishments and food processing plants, where wastewater can contain significant amounts of grease and oil.
The steps of the cleaning process are as follows:
Before starting work, ensure that the equipment is not in use and prepare the necessary protective equipment (rubber gloves, mask, protective clothing) and tools (bucket, scraper).
The grease trap cover must be removed carefully, taking care not to damage the seal.
After removing the lid, you must first remove the layer of grease and oil floating on the surface, and then pump out or drain out the water underneath.
Then, any solids that have collected at the bottom of the equipment must also be removed.
The internal surfaces, partitions and cover should be cleaned thoroughly mechanically, using a scraper or brush. Avoid using hot water or chemicals as these can dissolve the grease and cause it to enter the sewer system.
Finally, check the components of the equipment (such as seals, baffles) and carefully refit and secure them. After cleaning, it is a good idea to fill the grease trap with clean water to reduce unpleasant odors and ensure optimal operation.
It is advisable to clean grease traps at least once a month, but more often if used intensively. Regular maintenance helps prevent blockages, unpleasant odors and contributes to protecting the environment.
Cleaning oil traps
Regular cleaning and maintenance of oil catchment systems is crucial to comply with environmental regulations and ensure efficient operation. These systems are located in locations where there is a risk of water contaminated with mineral oil or grease entering the environment, such as gas stations, car washes and industrial facilities.
The cleaning process consists of several steps:
First, the equipment must be safely stopped, and then the accumulated oily-sludge contamination must be removed using special suction equipment.
The internal surfaces of the equipment must then be thoroughly rinsed with a high-pressure washer to remove all residual contaminants.
Hazardous waste generated during cleaning must be transported and disposed of by a licensed company in accordance with applicable laws.
After cleaning, it is advisable to check the condition of the equipment and, if necessary, carry out maintenance work, such as replacing seals or repairing damaged elements.
Regular maintenance is important not only to comply with environmental regulations, but also to prevent equipment efficiency from decreasing and potential malfunctions. Depending on the nature of the facility, it is generally recommended to perform this process at least once a year, but in case of intensive use, even every 3–6 months.
About us and our activities
Hidro-Consulting Kft. has been offering environmentally conscious and innovative solutions in the fields of water and wastewater treatment and hydraulic engineering since 2007. Their activities provide a full range of services for municipalities, businesses and residential clients, from design to construction to plant supervision and maintenance. Their expert team works with quality, European-made products and provides free expert advice at every stage of the investment. The company is committed to sustainable, environmentally friendly technologies and pays special attention to professional development and the education of the future generation.
We clean grease and oil traps ourselves with our trained professionals and available machinery, and we handle the handling of hazardous materials with our specialized partners.
Ask a question, request a quote! We'll help you!
+36 70 476 4467
Send us your questions, unique needs, and request for a quote, and we will respond within 2 days!